 Description
The Fibre Optic Cold Cure Kit is supplied within a a handy, soft case bag.
See below the contents of the kit ;
|
Polishing Disc’s
- Hand held disc used to polish fibre optic connectors
- Free floating universal pucks suitable
- for most 1.25mm and 2.5mm ferrules
- Must be held in light contact with the polishing film as the free floating puck holds ferrule only
|
|
Miller Kevlar Shears
- Serrated blades and high leverage cutting
- Long cushioned handles
- Miller scissors
|
|
Miller Dual Hole Stripper
- Recommended for stripping 250um coated fibre and 900um tight buffer tube
- 0.14mm laser drilled hole
- Soft plastic-cushioned handle grip
- Smooth, clean stripping action
|
|
Inspection Microscope X400 1.25mm & 2.5mm
- 200x and 400x Magnification
- Built in safety IR filter/attenuator 35dB
- Requires 3xAAA batteries (Supplied)
- Momentary ON/OFF switch
- Fine focus control
|
|
Extra Durable Cleanroom wipes
- Cleaning fibres before termination
|
|
IPA Pre-saturated Cleaning Wipes
- Excellent for removal of fluxes, light oils, polar soils, dirt inks, oxides and gel
|
|
Scribe Pen
- 30º bevelled edge
- Reversible blade which doubles the tool’s useful life
- Non-slip grip
- Clear safety cap to protect the blade when not in use
|
|
Anaerobic Adhesive
- Two part system, self cures in minutes with no heat required
- Retaining compound is injected directly into the connector with a syringe needle (syringe included)
- Either dip or spray fibre with the primer and connectorised as usual
|
|
Small Fibre Optic Disposal Unit
- A handy and safe solution of disposing cleaved fibre ends
- Perfect for on-site installers
|
|
Lapping Films/Pad
- Utilised for the polishing of fibre optic connectors
- Comprehensive range of imperial lapping films
- Sheets available in various different grades
|
|
Work Mat - Fibre Safe
- Sub surface for polishing applications
- Fibre scraps easily visible on dark coloured rubberised mat
|
|
